Mpressive Threadz Studio Blog

Sharing my love of sewing


How to Make Shoulder Pads for a Jacket

I no longer buy pre-made shoulder pads.  The last pair I brought years ago consisted of expensive small wads that were not rounded like a shoulder.  When I make a jacket, I make a pair of shoulder pads using the jacket’s front and back pattern pieces.  I buy yards of fusible fleece when it’s on sale and use remnants of interfacing and cotton, so my pads are not expensive.  Customizing pads to accommodate fitting problems is easy.  A client has one shoulder that is higher than the other, so I make the left shoulder pad with 4 layers of fleece and the right shoulder pad with 8 layers of fleece, giving her a balanced appearance.

It takes me about 15 minutes to make a pair of shoulder pads.  Here’s a slideshow demonstration.

This slideshow requires JavaScript.


1 Comment

Proud of My Student

A year ago Kira could barely stitch a straight line.  This is what she finished today.  Sequin on netting, crepe backed satin, organza underlining, fully lined with a separating zipper.   Woohoo, Kira!

Leave a comment

Recess is Over, Sewing School in Session. Sewing Lesson: Flat-fell Seam and Patch Pocket (square corners, unlined)


Hello students.  Four prom dresses, one wedding dress for customer, and a graduation dress for daughter are complete.  Sewing school was in recess until all that sewing was done.  The break is over and the sewing lessons are back.  The next few lessons will be part of a series on pockets.  We will do patch pockets (square and rounded corners), an in-seam pocket, and a side front pocket.  The lessons will also include the flat-fell seam, the welt seam, and the double welt seam.

Here’s the lesson for the flat-fell seam and the unlined patch pocket with square corners.  Don’t forget you can post questions in the comments section.


Sewing Project # 1: Time to cut and sew your six-gore skirt!

Hello!  It’s time! Time for my enthusiastic newbie sewists to cut and sew their six-gore skirts.  You have practiced and completed your sewing samples, so you know how to finish your seams, sew different types of hems, attach a waistband and put in a centered zipper.  You’ve read the tutorial on fabric grainlines and naps, so you how to lay your pieces on the fabric. 

You have all techniques needed to sew the skirt.  Keep your reference notebook close by.  Looking at your samples while making your skirt will help a great deal.

Any questions or feedback can be posted in the comments section.  If you want, you can post a comment to let me know you have finished your skirt. 

Click here for the cutting and sewing instructions.  Remember, have fun!

Leave a comment

Sewing Lesson # 4: Folded Waistband, Easing, Very Narrow Machine Hem

Hello students.  I hope you are having gorgeous weather. 

Here is another sewing sample.  This will complete the techniques you will need in order to make your six-gore skirt.  Woo Hoo!

I should have the pictures for the six-gore skirt project completed in a couple of day.  Then I can post the instructions for that project.  Woo Hoo!

Click here for sewing lesson # 4.  Don’t forget: You can post your questions in the comments section. 

Have a great sewing day!

Leave a comment

Sewing Project # 1: The Six-Gore Skirt – Drafting and Fitting the Pattern

Hello my ambitious newbie sewists.  Are you ready to make your go-to six-gore skirt pattern that fits well and can be used over and over?

Remember, I wanted to keep the cost to a minimum so I am using some very basic tools and improvising.  However, the right tools make the job easier and faster.  If you have an L-square ruler and a curved ruler, it’s easier to square and true lines.  A wide 18” long see-thru ruler makes marking seam allowances a breeze. With a rotary cutter and cutting mat, you can cut out the pieces in seconds.

Learning to fit a garment takes practice.  This project will give you just a taste of it.  Reading about fitting and doing it a lot over time will make you better at perfecting the fit of your garments.

Click here for the lesson to draft and create the skirt sample for fitting.  If you have any questions, use the comment section.  I will answer as soon as possible.

Next week I will post instructions for constructing the skirt in “real” fabric.  Imagine the skirt in a beautiful linen or printed cotton. Remember prints are the hot look this spring and summer.  Avoid stripes and plaids for this first skirt because it’s hard to match the lines.  You can use the week to buy the fashion fabric and notions to make your six-gore skirt.

You will need:

  • Fashion fabric: yardage = 2 times the skirt length, without nap fabric
  • Interfacing: yardage = length of waistband pattern piece, lightweight and fusible
  • 9” regular skirt zipper to match your fabric
  • Thread to match your fabric

Until next week, HAPPY DRAFTING!

Leave a comment

Sewing School: Taking Body Measurement and Understanding Fabric Grainlines and Nap

Last week I used Kira to test-drive the instructions for drafting and fitting a six-gore skirt.  This week I refined the lesson after watching Kira.  I think the instructions are now very clear and easy to follow.  Unfortunately, I don’t have pictures and pictures are very important.  I won’t post the drafting lesson this week as planned. 

However, while refining the lesson I realized that there are other important concepts I must give to you in order for you to move forward, such as taking body measurements and understanding grainlines.  Therefore, I have created two tutorials to cover those topics.  You won’t need all the measurements on the Body Measurement form for drafting the skirt, but you will need these measurements in the future, so take them now.

Click here for the tutorial on taking your body measurements.

Click here for the tutorial on grains, grainlines and naps.